Instanteanous electric hot water system installation.
We received a call from the owner of a unit in Randwick whose existing instantaneous electric hot water system had stopped working. Within a few hours, one of our hot water system installers was onsite assessing the problem.
The current electric hot water system at the unit was extremely old and inefficient. After discussing the hot water usage with the customer, we recommended the installation of a new Stiebel Eltron Instant hot water system.
The size of the unit and the fact it didn’t have an internal laundry, meant the hot water system was located within a cupboard in the kitchen. The Stiebel instantaneous hot water system only requires a very small installation space so was the perfect replacement. This meant the transition over to the new system could be done quickly with little disturbance to the customer or damage to the property.
- Attend the unit in Randwick to replace the existing electric hot water system.
- Assess the site for safety and make appropriate arrangements.
- Isolate the electrical supply to the system and retest the system with an external device.
- Drain and remove the old electric HWS.
- Supply and install a new instantaneous, electric Stiebel Eltron electric hot water system in the same position.
- Install a new tempering valve to comply with AS3500 Plumbing code.
- Reconnect to existing power circuit.
- Adjust and reconnect to hot and cold pipework.
- Commission and test system.
- Disposal of and recycle the old hot water tank. Clean up the work area and dispose of any associated rubbish.
NO HOT WATER? LEAKING HOT WATER HEATER?
With 25+ years expertise, we’re happy to help and provide advice so you make the right decision when it comes to fixing or replacing your hot water heater. Our trucks are on the road right now, stocked with thousands of spare parts and replacement hot water heaters to get you back enjoying trouble free hot water today. Don’t hesitate to contact John or Steve for helpful advice you can trust.
Stiebel Eltron Instantaneous hot water systems
Stiebel Eltron hot water systems are made in Germany and we often install their electric instant hot water systems into units and apartments where only a small space is available for the HWS.
Their 3 phase instantaneous electric hot water system means the customer never runs out of hot water with good energy efficiency. The system requires no ventilation, safe tray or flue.
Save time and money by employing a local expert
Did you know that often the repair and installation of a hot water system requires the expertise and qualifications of both a licensed plumber and a licensed electrician?
We are qualified to undertake any plumbing and electrical work required to ensure your hot water heater is repaired quickly and within budget. Plumbers who do not specialise in the installation of hot water heaters may need to outsource the electrical work required to another tradesperson, thereby holding up your hot water system repair or installation, adding extra expense due to additional call out fees charged by employing two tradespeople.
Your hot water heater is an expensive appliance. Don’t risk voiding your warranty.
Additionally, most manufacturers won’t cover the terms of your hot water system warranty if it isn’t installed by a licensed hot water technician or qualified plumber. Hot water tanks are an expensive appliance so why would you risk voiding your warranty by installing it yourself or employing the services of someone who isn’t licensed?