Rheem hot water service specialists Northern Beaches.
We were contacted by a customer located in Beacon Hill on Sydney’s Northern Beaches who had a small leak coming from their electric Rheem 250 litre hot water system.
Once onsite, we ascertained that the small leak was at the element. This was a simple and cost effective repair.
Whilst at the property, Steve suggested the service of the hot water system which can uncover other, hidden problems. Whilst doing the service, Steve determined that the pressure limiting valve had failed, causing the TPR valve to run, over-pressurising the tank.
We tank tested the element and thermostat. Both were working correctly. These simple tests give the customer peace of mind that they should enjoy trouble-free hot water for years to come.
Further reading: The importance having your hot water system serviced every 5 years »
- Attend the property at Beacon Hill to diagnose and make repairs to issues with leaking Rheem hot water system.
- Assess the site for safety and take appropriate actions.
- Isolate the hot water system at main power or gas supply.
- Re-test load at system with external device
- Inspect the Rheem electric hot water system and locate the source of the leak.
- Carry out the necessary repair.
- Reconnect to existing power circuit or gas
- Adjust and re-connect to hot and cold pipework.
- Re-commission the hot water system.
- Once load re-established, take current reading.
- Clean the worksite of any associated rubbish.
LEAKING HOT WATER SYSTEM?
Based in Warriewood, we are your local Northern Beaches hot water heater repair specialists. With 25+ years expertise, we’re happy to help and provide advice so you make the right decision when it comes to fixing or replacing your hot water heater.
Our trucks are on the road right now, stocked with thousands of spare parts and replacement hot water heaters to get you back enjoying trouble free hot water today.
Don’t hesitate to contact John or Steve for helpful advice you can trust.
Read this! It could save you thousands…
Have you been told by a plumber or hot water company that your hot water system needs to be replaced – at considerable cost? If so, contact the hot water specialists here at Cheapa Hot Water for advice. Over the years we have saved countless customers thousands of dollars by undertaking cost-effective repairs to faulty hot water heaters when they had been told they couldn’t be fixed. Don’t believe us? We can put you in touch with these customers for verification. A phone call to Cheapa Hot Water may save you thousands! Call 0410 693 532 to speak to a hot water specialist now.
Cheapa Hot Water Sydney
Save time and money by employing a local expert
Did you know that often the repair and installation of a hot water system requires the expertise and qualifications of both a licensed plumber and a licensed electrician?
We are qualified to undertake any plumbing and electrical work required to ensure your hot water heater is repaired quickly and within budget. Plumbers who do not specialise in the installation of hot water heaters may need to outsource the electrical work required to another tradesperson, thereby holding up your hot water system repair or installation, adding extra expense due to additional call out fees charged by employing two tradespeople.
Your hot water heater is an expensive appliance. Don’t risk voiding your warranty.
Additionally, most manufacturers won’t cover the terms of your hot water system warranty if it isn’t installed by a licensed hot water technician or qualified plumber. Hot water tanks are an expensive appliance so why would you risk voiding your warranty by installing it yourself or employing the services of someone who isn’t licensed?