Using solar panels to heat your hot water is a cost-effective and environmentally friendly option for homes and businesses across Sydney. With increasing gas and electricity prices, the rising cost of living, and the need to reduce our carbon footprint, more property owners are installing hot water systems that integrate with their rooftop solar panels (PV panels).
PV solar panels + heat pump hot water systems.
An efficient, cost-effective and environmentally friendly hot water solution.
Heat pump hot water systems can be highly efficient when combined with PV (photovoltaic) solar panels.
Heat pumps extract heat from the surrounding air and transfer it to water (much like a reverse refrigerator). Heat pumps use electricity to power the compressor, fan, and pump, but the process is far more efficient than traditional electric water heaters because it only uses a fraction of the energy.
Rooftop photovoltaic (PV) solar panels convert sunlight into electricity. When installed on your property, they can power your home’s electrical appliances, including the heat pump.
Switching to a solar energy hot water system
The benefits of integrating a heat pump water heater with PV solar panels.
During daylight hours when the sun is shining, the electricity generated by your PV solar panels can directly power a heat pump hot water system using free, renewable energy from the sun.
If you have a battery storage system, excess solar energy generated during the day can be stored and used to run the heat pump at night or during cloudy periods. If no battery is available, you can time your hot water system to run during peak solar generation times.
Heat pumps typically use 3-4 times less electricity than convenientional electric hot water systems so, by combining PV solar panels with an energy efficient heat pump, you can maximise your energy savings and reduce your reliance on the power grid. You’ll lower your carbon footprint significently, especially if you’re replacing a traditional electric or gas water heater.
In short, a heat pump hot water system paired with PV solar panels is an efficient, cost-effective, and environmentally friendly solution.
Further reading
Rheem AmbiPower Heat Pump
Capacity : 280 litres | Number of people : 6 | Warranty : 7 years
The Rheem AmbiPower heat pump is a great replacement of aging gas and electric water heaters, offering a high Coefficient of Performance (COP) of 5.2 (see below for more information).
AmbiPower heat pumps have been designed and tested to withstand the harsh Australian conditions. With its advanced wrap around microchannel heating technology for uniform and faster water heating, the AmbiPower is suitable for harsh water conditions and cold climates (with an operating range from -6°C) to higher ambient temperatures.
Key energy and cost saving factors
- Increased energy efficiency: The Rheem AmbiPower Heat Pump is designed to be highly efficient, using ambient air to heat water. This means it requires less energy to operate compared to traditional gas heaters, translating into lower electricity bills.
- Reduced environmental impact: By moving away from fossil fuels to heat the hot water, the heat pump reduces the users carbon footprint making them a more sustainable option that contributes to a greener planet.
- Cost savings: The initial investment in a heat pump is offset by the long-term savings on energy bills. Additionally, with the removal of the gas water heater, the customer can now disconnect from the gas supply, eliminating the quarterly connection charges that were a constant drain on our finances.
Rheem heat pump features
- Enamel lined water tank reduces the risk of corrosion.
- Side fan design provides maximum airflow and protects from the rain.
- Durable outer shell in painted sheet metal design with Aluminium top cover to reduce corrosion and withstand harsh weather conditions.
- LED touchscreen controller provides optimum visibility, product performance information and user-friendly operation.
- Advanced wrap around microchannel heating technology for uniform and faster water heating
- Suitable for cold climates with an operating range from -6°C to +43°C
- Suitable for harsh water conditions
- Can save up to 73.9% on your water heating energy consumption compared to an electric water heater in Zone 3#
- 2.4 kW back-up element for cold climatic conditions
- User-friendly touch screen LED display
- Eligible for STCs (may be eligible for additional incentives in some states)
- 7 year cylinder warranty (see below)
- Suitable for up to 6 people (based on 7 min showers at 42°C mixed water temperature in moderate climate, time of use tariff)
- Uses R290 refrigerant with a GWP of <3
Warranty : 7 years cylinder supply. 3 years cylinder labour. 3 years sealed systems supply including labour. 1 year parts supply and labour on all other parts. Warranty terms and conditions may apply. Contact us for more information.
What is Coefficient of Performance (COP)?
The Coefficient of Performance (COP) is a measure of the efficiency of heating and cooling systems. It is defined as the ratio of useful heating or cooling provided to the work or energy input required to deliver that heating or cooling.
Cheapa Hot Water Sydney
Hot water is our business – it’s not a sideline. Each year we repair and install hundreds of hot water systems in homes and businesses across Sydney.
- We offer free delivery of your new hot water system and complimentary disposal and recycling of your old water heater.
- As one of Sydney’s largest hot water system suppliers, our enormous buying powers and ability to buy direct from the manufacturer means we can pass attractive savings on to our customers.
- Our fully qualified, licensed hot water heater installers have 30+ years of experience each. We are fully insured and pride ourselves on our old-fashioned customer service.
- We are accredited service agents for all the hot water heater brands including Rheem, Dux, Rinnai, Aquamax, Bosch, Conergy, Hocking, Apricus, Vulcan, Edwards Solar, Solahart, Everhot and more.
- We are qualified to undertake all the plumbing and electrical work required to install a new hot water system. There is no need to waste time and money employing multiple trades.
- We have all the equipment needed to install your hot water system today. We don’t have to hire or wait for other trades to arrive with the required equipment.
Save time and money by employing a local hot water expert
Did you know that often the repair and installation of a hot water system requires the expertise and qualifications of both a licensed plumber and a licensed electrician?
We are qualified to undertake any plumbing and electrical work required to ensure your hot water heater is repaired quickly and within budget. Plumbers who do not specialise in the installation of hot water heaters may need to outsource the electrical work required to another tradesperson, thereby holding up your hot water system repair or installation, adding extra expense due to additional call-out fees charged by employing two tradespeople.
Your hot water heater is an expensive appliance. Don’t risk voiding your warranty.
Additionally, most manufacturers won’t cover the terms of your hot water system warranty if it isn’t installed by a licensed hot water technician or a qualified plumber. Hot water tanks are an expensive appliance so why would you risk voiding your warranty by installing it yourself or employing the services of someone who isn’t licensed?
